Fatal accident · Spain
Spanair Flight 5022 crashed on takeoff at Madrid
Spanair Flight 5022, a McDonnell Douglas MD-82, crashed in Madrid, Spain, on August 20, 2008, while attempting to take off for Las Palmas. There were 172 people aboard. Of those, 154 died. The cause was pilot error.
This is one of 1 Spanair fatal accidents on record. See also all plane crashes in 2008.
Flight 5022 failed to climb after liftoff
Flight 5022 departed Madrid for Las Palmas, Canary Islands. During the takeoff attempt, the MD-82 became slightly airborne but did not climb away normally. It then crashed into a ravine beyond the end of the runway.
The aircraft was a McDonnell Douglas MD-82, part of a family of short to medium range airliners widely used on high frequency domestic and regional routes. In this case, the crash sequence began at the runway, not later in cruise or approach.
The takeoff configuration was wrong
The McDonnell Douglas MD-82 took off without the crew extending the flaps and slats. Those devices increase lift at low speed and are a basic part of normal takeoff configuration on this type of jet.
The stated cause was pilot error. The note on this accident also said the pilots would not have known there was a problem because the warning alarm did not sound. That matters because a takeoff warning system is meant to alert the crew before or during the initial takeoff roll if the aircraft is not configured correctly. For general background on how investigators sort operational mistakes from system issues, see how investigators determine the cause.
A warning issue was part of the accident record
Madrid was also the place where a second issue entered the picture, the failed alarm. The note on the crash said malware may have interfered with the warning alarm software. That was presented as a possible factor in why no alert reached the crew, not as the stated cause itself.
When a warning system does not activate, investigators usually compare cockpit procedures, maintenance history, and system behavior to work out whether the failure was mechanical, electrical, software related, or a combination. In accident reporting, that distinction feeds into the final explanation of why the chain of events was allowed to continue. A general guide to that wording is what probable cause means.
The crash was one of the deadliest in Spain
Spanair lost 154 of the 172 people aboard, and there were no fatalities on the ground. The impact came after the aircraft left the runway environment at the end of the takeoff attempt.
This accident is commonly grouped with takeoff accidents in which an airliner failed to achieve safe climb performance because it was not properly configured. Those events are studied closely because they sit at the intersection of crew actions and last line warning protections in the cockpit.
Questions people ask about this accident
What caused the Spanair Flight 5022 crash?
The cause was pilot error. The aircraft took off without the flaps and slats extended, and the warning alarm did not go off.
Where did Spanair Flight 5022 crash?
It crashed in Madrid, Spain, after becoming slightly airborne and then going into a ravine beyond the end of the runway.
How many people died on Spanair Flight 5022?
There were 154 fatalities among the 172 people aboard. No one on the ground was killed.
What aircraft was involved in Spanair Flight 5022?
The aircraft was a McDonnell Douglas MD-82, registration EC-HFP, operated by Spanair.
Related accidents
3 killed, 12 on the ground- 153 killed, 10 on the ground
- 90 killed
- 160 killed
- 112 killed
Correct this page or send a photo
Spotted a wrong date, registration or number? Have a photo of the aircraft or the site that you took yourself? Send it here. Nothing is published until an editor has checked it.