Fatal accident · Switzerland
Swissair Flight 306 Caravelle crash near Durrenasch
Swissair Flight 306, a Sud-Aviation Caravelle III, crashed near Durrenasch, Aargau, Switzerland, on September 4, 1963. The flight was operating from Zurich to Geneva. All 80 people aboard died. The cause was a fire that followed overheated brakes, tire failure, hydraulic damage, and loss of control.
This is one of 11 Swissair fatal accidents on record. See also all plane crashes in 1963.
Flight 306 went down soon after leaving Zurich
Swissair Flight 306 was a scheduled flight from Zurich to Geneva operated by a Sud-Aviation Caravelle III. About 10 minutes after takeoff, the aircraft crashed near Durrenasch in the canton of Aargau, about 18 miles west-southwest of Zurich.
Everyone on board died. There were no deaths on the ground.
The Caravelle was an early short-to-medium range jet airliner, used widely in Europe in that period. Flights of this kind linked major cities on short sectors, with quick turnarounds and repeated daily operations.
An unauthorized taxiing maneuver set up the failure
The Caravelle had encountered fog at Zurich Airport before departure. The pilot taxied partway down the runway without authorization in an attempt to clear the fog, then returned to the start of the runway for takeoff.
That maneuver involved braking hard enough to overheat the brakes. The overheating then led to a wheel flange splitting. A tire burst after that, and the damage extended beyond the wheel assembly.
Brake overheating can create a chain of failures in the landing gear area, especially when heat transfers into wheels and tires. In this case, the sequence did not end on the ground. It continued after liftoff and became a fire.
Fire damaged the aircraft and control was lost
Flight 306 suffered damage to a hydraulic line after the tire burst. That damage started a fire, and the fire led to loss of control.
Hydraulic systems power key aircraft functions, and a fire in that area can quickly turn a local failure into a broader control problem. When investigators classify an accident this way, the final event may be loss of control in flight, but the initiating failure still matters because it explains how the crew lost the airplane.
This accident is also part of the wider history of fire-related crashes, where heat, fuel, and system damage combined faster than the aircraft could recover from.
Humlikon lost a large share of its population
Durrenasch was the crash site, but the effect reached well beyond it. Forty-three of the people aboard came from the small town of Humlikon.
That was about one fifth of the town's population. The concentration of victims from one community made the loss unusually visible at a local level, even within a disaster that had already claimed everyone on the aircraft.
Accidents in the early jet age often led to close study of heat, wheels, brakes, tires, and nearby hydraulic components. Those relationships became a recurring focus in later safety work across commercial aviation.
Questions people ask about this accident
What caused Swissair Flight 306 to crash?
The crash was caused by a fire. The sequence began with overheated brakes after an unauthorized taxiing maneuver, followed by a split wheel flange, a burst tire, damage to a hydraulic line, and then loss of control.
Where did Swissair Flight 306 crash?
Swissair Flight 306 crashed near Durrenasch in Aargau, Switzerland. The site was about 18 miles west-southwest of Zurich.
How many people died on Swissair Flight 306?
All 80 people aboard died. There were no fatalities on the ground.
What aircraft was involved in Swissair Flight 306?
The aircraft was a Sud-Aviation Caravelle III, registration HG-ICV. It was operating a scheduled flight from Zurich to Geneva.
Related accidents
- 229 killed
- 94 killed
- 95 killed
- 106 killed
- 85 killed, 1 on the ground
Correct this page or send a photo
Spotted a wrong date, registration or number? Have a photo of the aircraft or the site that you took yourself? Send it here. Nothing is published until an editor has checked it.