Fatal accident · United States
United Air Lines Flight 232 crash landing attempt at Sioux City
United Air Lines Flight 232, a McDonnell Douglas DC-10-10, crashed at Sioux City, Iowa, on July 19, 1989. There were 298 people aboard and 112 died. The crash followed a mechanical failure, when the rear engine broke apart and the crew lost all three hydraulic systems.
This is one of 46 United Air Lines fatal accidents on record. See also all plane crashes in 1989.
Read the cockpit voice recorder transcript
Flight 232 lost all hydraulics after the rear engine failed
Flight 232 was flying from Denver to Chicago when the No. 2 engine, mounted at the rear, failed catastrophically in cruise. The breakup damaged the aircraft so badly that all three hydraulic systems were lost.
On a DC-10, hydraulics powered the main flight controls. With that system gone, the crew could no longer fly the aircraft in the normal way. They had to maneuver it with engine thrust alone, changing power to influence heading and descent. That kind of control was limited and imprecise. In broad terms, it sits within mechanical failure crashes, but this case involved a rare combination of engine breakup and complete hydraulic loss.
The crew aimed for Sioux City using engine thrust alone
Sioux City became the diversion point after the aircraft lost normal controllability. The crew kept the DC-10 airborne by using the remaining engines to make small directional and pitch changes.
That brought the airplane to an attempted landing at Sioux City, where it crashed. No one on the ground was killed.
Flying a large airliner this way gave the crew only rough control. Thrust could help turn or change the flight path, but it could not replace full hydraulic control of the airplane.
The fan disk failure traced back to a defect in manufacture
The McDonnell Douglas DC-10-10, registration N1819U, was found to have suffered a failure that began in the No. 2 engine fan disk. Investigators traced that failure to a fatigue crack that had not been detected before the flight.
The fan disk itself had a manufacturing defect. Microscopic cracks were present because of impurities in the metal, and those cracks later grew until the disk disintegrated. That breakup sent debris outward and led to the loss of all three hydraulic systems.
This is the kind of chain investigators define step by step when they explain how investigators determine the cause of an accident. Here, the sequence ran from a defect in the disk, to crack growth, to engine disintegration, to hydraulic system loss, and then to the failed landing attempt.
Flight 232 later became the subject of a television film
Flight 232 was later dramatized in the 1992 television movie Crash Landing: The Rescue of Flight 232.
The accident killed 112 of the 298 people aboard. It remains one of the best-known examples of a transport jet reaching an airport after losing all normal hydraulic control, even though the landing attempt could not be completed safely.
Questions people ask about this accident
What caused United Flight 232 to crash?
A mechanical failure started the accident. The rear No. 2 engine broke apart, and the damage caused the loss of all three hydraulic systems.
How many people died on United Flight 232?
There were 112 fatalities among the 298 people aboard. There were no ground fatalities.
What kind of plane was United Flight 232?
It was a McDonnell Douglas DC-10-10 operated by United Air Lines. The aircraft registration was N1819U.
Was United Flight 232 turned into a movie?
Yes. The accident was the subject of the 1992 TV movie Crash Landing: The Rescue of Flight 232.
Related accidents
- 44 killed
- 65 killed
3 killed, 12 on the ground- 88 killed
- 110 killed
Correct this page or send a photo
Spotted a wrong date, registration or number? Have a photo of the aircraft or the site that you took yourself? Send it here. Nothing is published until an editor has checked it.